You are using a web browser not supported
You are using a website browser that is not supported by this website. This means that some functionality may not work as intented. This may result in strange behaviors when browsing round. Use or updgrade/install one of the following browsers to take full advantage of this website
firefox 66+
chrome 72+
edge 17+
safari 12+
opera 58+
  • Product
  • Benefits
  • Size
  • Help
120828 kleber dynaxerhp3 3 4 face 01


Road tyres and peace of mind combined

good value

good value

Enjoy remarkable service life

  • Its hybrid BDR mix provides an excellent balance between wear and grip.



Enjoy excellent safety in the wet 

  • Its progressive radius shoulder profile promotes the "bow effect" in deep water. 

  • Its wide longitudinal grooves disperse water backwards as quickly as possible. 

  • Its long biting edges and lateral grooves break the film of water and promote flow on the sides. 


Do you own this tyre?
1 size is available for this tire


  • 185/65R15 88T
    Load Index
    Load index
    Load index (number) Take for example a KLEBER DYNAXER HP3 tyre, size 205/55 R 16 91 V: 91: The load index of a tyre is identified by a number which corresponds with the maximum load the tyre can bear at the correct pressure.
    Speed Index
    Speed index
    Speed index (number) Take for example a KLEBER DYNAXER HP3 tyre, size 205/55 R 16 91 V: V: Speed index (also known as performance index). Indicates the maximum speed at which the tyre can bear a load which corresponds to its load index. This speed index consists of letters from Q (for the lowest maximum speeds) to Y (for the greatest speeds).

    Find all the information about labelling here

    Noise dB

Understand the tyre label

Your guide to find fuel efficiency, safety and quieter tyres

label sample

label sample

The left-hand part of the label shows the contribution made by the tyre to fuel consumption and CO2 emissions.
Tyres, mainly due to their rolling resistance, account for around 20% of vehicles' fuel consumption. A reduction in rolling resistance can therefore make a considerable contribution to the energy efficiency of road transport, and thus to reducing CO2 emissions. It is rolling resistance, measured on a simulator, that determines the grade of the tyre.

What is the difference between an A tyre and a E tyre?

The difference in Rolling Resistance is considerable and represents a technological evolution of several tyre generations.

On a car, the difference in impact on fuel consumption between an A tyre and an E tyre is very large, on the order of 0.5 litres/100km.

This amounts to around 80 litres of fuel per year (assuming 15,000km/year).

Over €100/year for a petrol vehicle (at a pump price of €1.30/l.)

The economic impact on the consumer is very considerable, and so is the environmental impact, as this difference in consumption corresponds to 12g of CO2 emissions per km.

label sample

label sample

The right-hand side of the label shows the tyre's performance when braking on a wet surface. The measurements are taken on vehicles in conditions defined by European regulations (speed, road characteristics, water depth, temperature, etc.).

The grade is established by comparing the performance of the tested tyre with a reference tyre.

What is the difference between an A tyre and an E tyre? (For this safety performance, tyres below E grade are not authorised for sale)

The difference in braking distance between a vehicle fitted with category A tyres and a vehicle fitted with category E tyres is over 18 metres.

label sample

label sample

Traffic noise is a major source of noise pollution. The lower part of the label concerns the level of noise emitted outside the vehicle, and not the noise perceived by the driver inside the vehicle. The figure expresses the sound level in decibels.


EPREL database QR code

Grading and technical information are communicated to Authorities and added to the European EPREL database. This database is accessible through the QR code next to the Energy sign and leads you to the product information sheet of the tyre. 


3PMSF marking

Indication whether the tyre is a tyre for use in severe snow conditions (3PMSF marking).


Ice grip marking

Indication whether the tyre is an ice grip tyre (ice grip marking). Ice grip tyres are specifically designed for road surfaces covered with ice and compact snow, and should only be used in very severe climate conditions (e.g. cold temperatures). Using ice grip tyres in less severe climate conditions (e.g. wet conditions or warmer temperatures) could result in sub-optimal performance, in particular for wet grip, handling and wear.

Tyre information

Safety and utilisation advice
Tyres are the only point of contact between the vehicle and the road. Therefore, users must ensure that they preserve the condition and performance of their tyres.




This browser does not support PDFs. Please click here to download PDF